Are your waterjet parts compatible with my machine?

Our parts are OEM-compatible and fit Accustream, OMAX, Flow International, KMT Waterjet and most other major waterjet brands. If you are unsure about compatibility, send us your current part number and we will confirm the correct replacement.

What is the difference between 60K and 94K parts?

60K (60,000 PSI / 4,137 bar) is the standard operating pressure for most waterjet systems. 94K (94,000 PSI / 6,480 bar) is the ultra-high-pressure range used by newer machines for faster cutting speeds and improved edge quality. Parts are NOT interchangeable between pressure ratings — always match the correct pressure class.

How often should I replace waterjet consumables?

Mixing tubes typically last 40–120 hours of cutting depending on abrasive type and pressure. Orifices last 40–100 hours. High-pressure seals in the pump should be replaced every 500–1000 hours. We recommend keeping critical spares in stock to minimise downtime.

H2O

H2O

40K INTENSIFIER PILOT VALVE HOUSING, 006869-1

60K Intensifier Seal Tool Kit, B-2291-1 + B-1866-1

Abrasive diamond head assembly, 301329-1-09, 0,20 mm

Abrasive diamond head assembly, 301329-1-09-SF, 0,20 mm

Abrasive diamond head assembly, 301329-1-10, 0,25 mm

Abrasive diamond head assembly, 301329-1-10-SF, 0,25 mm

Abrasive diamond head assembly, 301329-1-11, 0,28 mm

Abrasive diamond head assembly, 301329-1-11-SF, 0,28 mm

Abrasive diamond head assembly, 301329-1-12, 0,30 mm

Abrasive diamond head assembly, 301329-1-12-SF, 0,30 mm

Abrasive diamond head assembly, 301329-1-13, 0,33 mm

Abrasive diamond head assembly, 301329-1-13-SF, 0,33 mm

Abrasive diamond head assembly, 301329-1-14, 0,35 mm

Abrasive diamond head assembly, 301329-1-14-SF, 0,35 mm

Abrasive diamond head assembly, 301329-1-16, 0,40 mm

Abrasive diamond head assembly, 301329-1-16-SF, 0,40 mm

Actuator Assy I, 001323-1

Actuator Assy II, 003840-1

Adapter KMT to H20 IDNN , 100206-3

Adapter OMAX to IDE, 301200-2

Adapter Short Stop Filter, 3/8" X 1/4" Assembly, 20454363

Air Actuator Repair Kit, 302017-1

Alignment scout FLOW, 7.14 x 0,76 x 76,4

Alignment scout FLOW, 7.14 x 1,02 x 76,4

Anti-backsplash valve

Bending tool 1/4"

Bending tool 1/4", 3/8"

Blade coning tool 1/4", 05108808

Blade coning tool 3/8", 05108824

Blade coning tool 9/16", 05108816

Bleed down repair kit, 004694-1

Bleed down repair kit, 015084-1

Bleed down valve assembly, C-5841-1

Bleed down valve body, 001822-1

Blue GOOP

Blue goop can, 450 gr

Brass Back-up 60K, B-1465-1

Breather Vent, 400066-1

Cable guide assy, L, C-5462-1

Cable guide assy, R, C-5461-1

Ceramic plunger, 010253-1

Check valve assembly 94K, 020071-1

Check Valve Assembly, 010559-3

Check valve assembly, 301002-3

Check valve body 94K, 020077-1

Check valve body, 004383-3

Check valve inlet, 015384-1

Check valve insert 60K, 004382-1

Check valve outlet body, C-1313-1

Check valve outlet poppet, 005917-1

Check Valve repair kit, 302003-2

Check valve retaining screw, 004380-1

Check valve seat, 014388-1

Check valve spring, A-1606

Check Valve upgrade kit, 302040-1

Collet, 100171-281

Cone insert with Short Stop FIlter, 20454615

Cone insert, Short Stop Filter, 20454360

Coning and treading kit 1/4", 3/8"

Coning and treading kit 1/4", 3/8", 9/16"

Coning and treading kit 9/16"

Copper Paste CRC for jackbolts , 100 ML, 80082191

Diamond Slurry, 1 micron, 400 gr

Diamond Slurry, 3 micron, 400 gr

Electric Shift Actuator Assembly, B-8346-1

End bell Assembly Left, 94K, 020072-1

End bell Assembly Right, 94K, 020074-1

End Cap Assembly 94K, 014817-1

End cap assy, 321276-1

Filter Cartridge 9" 10 micron, 606210-9-F

Firing pin, 002226-1

Flat Outlet Poppet, 05116561

Focusing tube 7.14 x 0,76 x 101,6 with collar and washer

Focusing tube 7.14 x 0,76 x 101.6

Focusing tube 7.14 x 0,91 x 101,6 with collar and washer

Focusing tube 7.14 x 0.76 x 76.2

Focusing tube 7.14 x 0.76 x 76.2 with collar and washer

Focusing tube 7.14 x 0.91 x 76.2